====================================================================================================

HITACHI Image Viewer for media

Copyright (c) Hitachi, Ltd. 2016. All rights reserved.

====================================================================================================

 [ Software name ] 
Image Viewer for media

 [ Operation environment ] 
You need a computer that satisfies the following conditions to display images by using the viewer.
  OS : Microsoft Windows 7 Professional 64-bit(Service Pack 1 applied)
     : Microsoft Windows 10 Pro 64-bit
  CPU : Pentium 4 1.8 GHz or higher
  Memory : 1 GB or more
  Colors : 16 bits or more
  Display resolution : 1024 x 768 dots or more

 [ File name ] 
ImgView.exe

----------------------------------------------------------------------------------------------------

 [ Overview ] 
This section describes how to use the media viewer.

 [ Installation and Uninstallation ]
This software is not installed to or uninstalled from a computer.
You can view CT images only by running this software from the media.

 [ Starting the viewer ] 
(1) Insert the media in the CD/DVD drive.

(2) The media viewer starts automatically.
     (NOTE)
     The media viewer may not start automatically, depending on the settings when  
     this media was created or the environment in which this media is used.
     In this case:
     Click My Computer and double click the drive in which the media was inserted.
     Then, double click the START.BAT file on the media.

(3) See the MANUAL.GIF file or MANUAL.PDF file in the MANUAL folder on the media.

NOTE: To view PDF files, Adobe Reader is required.
      You can download Adobe Reader from the following URL:
      http://www.adobe.com/products/reader

 [ Cautionary notes on using the viewer ] 
(1) You cannot view CT images even if you copy the media viewer to a local hard disk.

(2) In the Measured Distance/Angle and ROI Settings, which is part of 
    the analysis functions included in this viewer, an error dialog box might 
    appear when enabling or disabling the transparent option.
    If an error dialog box appears, click the OK button and continue with the operation.

(3) Removing the media from the drive before exiting this viewer 
    might cause the viewer to operate incorrectly.
    Therefore, make sure that you have exited the viewer before removing the media.

(4) This viewer can display only CT images taken by Hitachi, Ltd. equipment.

(5) Do not use this viewer for the purpose of diagnosing.

(6) Please do not take out this media outside the country. 

(7) Personal information is included in this media. Please note handling. 

 [ Disclaimers ] 
(1) The copyright for this software is owned by its distributor, Hitachi, Ltd..

(2) No support is provided for the use of this software.

(3) Modifications might not be made even if a problem with this software is reported. 
    Please keep it in mind and use this software.

(4) Hitachi, Ltd. assumes no responsibility whatsoever for any problems, damages, 
    or malfunctions resulting from the use of this software. Use this software at your own risk.

 [ Contact information ] 
Hitachi, Ltd.

2-16-1, Higashiueno, Taitou-ku, Tokyo-to 110-0015

Microsoft and Windows are either registered trademarks or trademarks of 
Microsoft Corporation in the United States and/or other countries.

====================================================================================================